Simpson 360

Digital - VOM

Volt-Ohm-Milliammeter

The Simpson 360 comes with AC adapter / charger, test leads and operator manual.

Re-chargeable batteries are an option, and not included.

The display is 3½ digits, 7-segment, 0.43 inch light-emitting-diode.

An analog indicator is located below the digital readout, and is used for a quick indication

of nulling, peaking, scanning and varying signal applications.

Controls include: Battery Charger / Off DC Ohms / AC selector, and a 14 position Function / Range

selector switch.  Seven banana jacks and two pin jacks are also on the front. 

The two pin jacks are for an analog output to a recorder. 

The battery test jack is used for reading the charge on the internal batteries.

Views of the back of the case, with separate fuse/battery door and the main Printed Circuit Board.

More inside views linked below.

The Simpson 360 can be operated off 120 VAC, four  "C" size rechargeable nickel-cadmium cells,

or four carbon zinc or alkaline "C" size cells. Three fuses are located near the batteries.

Case Size: 5¼ " x 7 " x 3¾ "  -  Weight: 4 Pounds 10 Ounces

The Adjust-A-View handle can also support the meter in a sloping position for viewing.

Simpson 360 Specifications

DC VOLTAGE

Ranges 200mV, 2V, 20V, 200V, 1000V

Accuracy ± (0.25% of reading + 1 digit)

Rated Circuit-To-Ground 1000 Volts

AC VOLTAGE

Ranges 200mV, 2V, 20V, 200V, 600V

Accuracy ± (0.5% of reading + 1 digit)

Rated Circuit-To-Ground 1000 Volts

DC CURRENT

Ranges 20μA, 200μA, 2mA, 20mA, 200mA, 2A, 10A

Accuracy ± (0.5% of reading + 1 digit)

AC CURRENT

Ranges 200μA, 2mA, 20mA, 200mA, 2A, 10A

Accuracy ± (1% of reading + 1 digit)

RESISTANCE

Ranges 200, 2k, 20k, 200k, 2M, 20M Ohms

Accuracy ± (0.5% of reading + 1 digit)

See Manual for complete specifications.

Back To Downloads                                                      Back To Main Page