Simpson 260® Series 7P
Analog - VOM
Simpson Catalog Number Unknown
The front on the Simpson 260 Series 7P changes from the Series 6, by the addition of a "off / transit"
position on the AC/DC switch. The output jack is also marked as 350 VDC Max.
New for the Simpson 260-7P is the size of the meter cover.
While the glass is the same size as always the cover is now 5 ⅛ " x 3 ¾ " instead of 5 ⅛ " x 4 ⅛ ".
The 260 Series 7P has the three Amp-Clamp scales.
Controls include: Ohms zero adjustment, Off - AC - DC Voltage selector switch,
and a 12 position Function / Range selector switch.
The eight recessed probe jacks are now the "Reverse-Banana" type for safety.
The white overload reset button is just to the left of the Simpson logo.
Starting with the 260 Series 7 and the 270 Series 5, the 1000 Volts to Ground rating is engraved
in or printed on to the face, just below the model number.
The rear case has warnings and safety tips molded onto the back.
More inside views linked below.
This model uses the NEDA 13 F "D" cell and NEDA 1604A (9 Volt) batteries combination.
The 260-7P has the separate battery / fuse cover to allow you to change the batteries and fuses
without removing the entire back cover.
Case Size: 5¼ " x 7 " x 3⅛ " - Weight: 3 Pounds
The Adjust-A-View handle can also support the meter in a sloping position for viewing.
Simpson 260-7P Specifications
Ranges: 250mV, 1V, 2.5V, 10V, 50V, 250V, 500V, 1000V
Accuracy 2% of full scale * Sensitivity 20K per volt
Ranges 2.5V, 10V, 50V, 250V, 500V, 1000V
Accuracy 3% of full scale * Sensitivity 5K per volt
Rated Circuit-To-Ground Voltage 1000V (AC or DC) max.
5 Ranges -20 to +50dB * Reference 0dB= 1mW into 600Ω
Ranges 50μA, 1mA, 10mA, l00mA, 500mA, 10A
Accuracy 1.5% full scale 5OμA, 2.0% of full scale, all other
Voltage Drop: (Nominal) 250mV on 50μA , 1mA; 255mV on 10mA , 10A; 300mV on 100mA, 500mV on 500mA
Ranges Rx 1, Rx 100, Rx 10K
Accuracy 2.5° of arc on Rx1, 2.0° of arc on other
Maximum Indication 0-2KΩ, 0-200Ω, 0-20MΩ