Simpson 260 Series 7M

Analog - VOM


Simpson Catalog Number Unknown

The front on the Simpson 260 Series 7 changes from the Series 6, by the addition of a "off / transit"

position on the AC/DC switch. The output jack is also marked as 350 VDC Max.

The 260 Series 7 now uses the "reverse banana" type test lead jacks.

 The Simpson 260-7M has the Taut Band Suspension dial with the three Amp-Clamp scales.

New for the Simpson 260-7 is the size of the meter cover.

While the glass is the same size as always the cover is now 5 " x 3 " instead of 5 " x 4 ".

The 260 Series 7 VOM's have the three Amp-Clamp scales.

Starting with the 260 Series 7 and the 270 Series 5, the 1000 Volts to Ground rating is engraved

in or printed on to the face, just below the model number.

The back of the case still has an "adapter lock" but they don't work with this model.

The rear case now has a warnings and safety tips sticker.

More inside views linked below.

This model uses the NEDA 13 F "D" cell and NEDA 1604A (9 Volt) batteries combination.

The 260-7M has the separate battery / fuse cover to allow you to change the batteries and fuses

without removing the entire back cover. This meter uses a 1 Amp & 2 Amp Fuse.

Case Size: 5 " x 7 " x 3"  -  Weight: 3 Pounds

The Adjust-A-View handle can also support the meter in a sloping position for viewing.

Simpson 260-7M Specifications


Ranges: 250mV, 1V, 2.5V, 10V, 50V, 250V, 500V, 1000V

Accuracy 2% of full scale * Sensitivity 20K per volt


Ranges 2.5V, 10V, 50V, 250V, 500V, 1000V

Accuracy 3% of full scale * Sensitivity 5K per volt

Rated Circuit-To-Ground Voltage 1000V (AC or DC) max.


5 Ranges -20 to +50dB * Reference 0dB= 1mW into 600Ω


Ranges 50μA, 1mA, 10mA, l00mA, 500mA, 10A

Accuracy 1.5% full scale 5OμA, 2.0% of full scale, all other

Voltage Drop: (Nominal) 250mV on 50μA , 1mA; 255mV on 10mA , 10A; 300mV on 100mA, 500mV on 500mA


Ranges Rx 1, Rx 100, Rx 10K

Accuracy 2.5 of arc on Rx1, 2.0 of arc on other

Maximum Indication 0-2KΩ, 0-200Ω, 0-20MΩ