Simpson 260® Series 5
Analog - VOM
This is the base model of the Simpson 260-5 series. No mirrored dial or overload protection.
All improvements over the previous series are inside. This model takes the banana jack type test leads.
Like the Simpson 260-5P, The 260-5 does not show anything about a Taut Band Suspension dial.
Controls include: Ohms zero adjustment, AC - DC - Select, a 12 position Function / Range
selector switch, and eight recessed probe jacks.
The back of the case has an "adapter lock" for use with "Add-A-Tester" accessories.
The printed circuit boards can now withstand higher voltages than previous models.
The batteries can be installed without taking the whole unit apart.
More inside views linked below.
The batteries used in this model are a single "D" cell, plus four "AA" batteries, there are two "AA"
below the "D" and one "AA" on each side. The batteries can be installed without
doing anything but removing the back of the case.
Case Size: 5¼ " x 7 " x 3⅛ " - Weight: 3 Pounds
The Adjust-A-View handle can also support the meter in a sloping position for viewing.
Simpson 260 Series 5 Specifications
Ranges 250mV, 1V, 2.5V, 10V ,25V, 50V, 250V, 500V, 1000V
Accuracy 2% of full scale * Sensitivity 20K per volt
Ranges 2.5V, 10V, 25V, 50V, 250V, 500V, 1000V
Accuracy 3% of full scale * Sensitivity 5K per volt
Rated Circuit-To-Ground Voltage 1000V (AC or DC) max.
5 Ranges -20 to +50dB * Reference 0dB= 1mW into 600Ω
Ranges 50μA, 1mA, 10mA, l00mA, 500mA, 10A
Accuracy 1.5% full scale 5OμA, 2.0% of full scale, all other
Voltage Drop: (Nominal) 250mV on 50μA , 1mA; 255mV on 10mA , 10A; 300mV on 100mA, 500mV on 500mA
Ranges Rx 1, Rx 100, Rx 10K
Accuracy 2.5° of arc on Rx1, 2.0° of arc on other
Maximum Indication 0-2KΩ, 0-200Ω, 0-20MΩ
Back To Downloads Back To Main Page